I’m here with something new and exciting! Like I’ve said in my previous post, I’ve been really motivated and determined lately. That means that I’m also motivated and determined to blog more and come up with some different content! In today’s post, I’m going to share with you a little do-it-yourself project that I did the other day. I DIY’d my own pair of frayed-hem jeans!
I got this sick pair of gray straight-leg jeans from work for $10. That’s right TEN DOLLARS. When I bought them they were waaay too long for me, but they fit perfectly around my waist! For $10, I racked my brain for an idea on how I could make them work. I mean, I could have got them hemmed for another $10 but who wants to do that?! Lol, not me!! I decided to hem them myself, and even better, I decided I wanted a FRAYED hem. We sell them at Topshop for almost $100. I love them and wanted them until I realized I could probably make them myself!! So I did and now here we are. Not only am I going to show you how they turned out, but I’m going to show you how I made them in case you guys want to try doing this yourselves! Here we go!
Things you’ll need:
- Jeans – you could use an old pair, or even thrift a pair!
- Scissors (preferably fabric scissors, but I lost mine..)
- Tweezers
- Pencil or Chalk
- Measuring Tape
Step One:
Lay out your jeans and measure them to your desired length. Then draw a line for yourself to follow while you cut! Keep in mind that you’re going to need an inch or so for the frayed part. Side note: It looks like I cut off three inches from the bottom of my jeans.. I ended up cutting an extra inch. #shortgirlproblems Also, you don’t NEED to measure it out, draw a line, etc. If you’re comfortable eye-balling it, by all means go for it!! It’ll probably look more natural if you do it that way. I’m just a neat freak.
Step Two:
If you’ve measured where you want to cut them, cut away! If you’re eye-balling it, cut away! *TIP: Try the jeans on after! See where they sit! If you want them shorter, measure it out and cut some more!
Step Three:
Take your measuring tape again and measure from the bottom of your jeans to where you’d like your fraying/fringe to start. I measured one and a quarter inch. Draw another line across then instead of cutting across, cut up towards that line and make even little strips. BE CAREFUL NOT TO DESTROY A SIDE SEAM. That may cause you problems in the future!
Step Four:
Take a good and close look at one of those little strips. You’ll notice that there are threads going vertically and horizontally. This is how we’re going to make it fray. Loosen up the threads a bit with your fingers. Then take your tweezers and start to pull away all the horizontal/white threads until you each the end of the strip. We don’t want those guys! Do this to every strip all the way around the leg.
This is what it should look like once you’ve done a few strips:
And once you’ve finished all the strips on BOTH legs, this is what they’ll look like!! 🙂
I’m so happy with how these turned out. I hope you guys enjoyed this post! I had a lot of fun putting this together. If you’d like more DIYs, let me know in the comment section below!
Happy Tuesday!
- Tiny ❤
Tiny In Toronto 